E350-230 * Automatic edge bander with glue pot and chain feeding system

Professional finishing quality in only 2.44 meters in length
Logical functioning controlled by PLC.

Complete with:

• Thermostatic glue control with automatic stand-by and temperature indicator.
• Light-up LED buttons to select machine operating units.
• Complete automation control of the various operating units from the encoder located on the transmission system for panel feeding.
• Diagnostic system with messages for machine use and maintenance.
• Statistical operating data: total hours of machine use, total and partial meters of edge used.
• Panel feeding system featuring a chain with rubber pads for maximum adherence to panels, installed on a strong steel chain with 5/8’’ links.

Two (2) numerically controlled steel guides on the machine frame guarantee the rubber pads run in a straight line and provide maximum resistance to side push.

Top pressure bar
With a double row of rubber rollers installed on bearings. The height of the pressure bar can be adjusted by means of a handwheel, according to the thickness of the panel being processed, and it is fitted with a metric scale height indicator.

Edge feeding: synchrony between the panel and the edge
To guarantee perfect gluing thanks to the edge feed roller moving system, directly driven by the panel.

Pneumatic shear for cutting edge coils up to 2 mm
Pneumatic shear, front and rear.

Glue pot
Fitted with six (6) electrical heating elements (four in the glue pot, one in the turret, and one inside the glue spreading roller) to guarantee uniform temperature, eliminating the risk of high temperatures damaging the glue, which would prevent perfect gluing results. The motorized glue spreading roller distributes a uniform layer of glue that can be adjusted in thickness on the side of the panel to be processed.

Two (2) pressure rollers:

• First floating roller Ø 80 mm.
• Second rubber pressure roller.

Automatic front/rear single-motor end trimming unit (straight cut) with copiers and collector hood.

Flush trimmers
With Z4 Ø75 mm cutterblocks, with disposable knives with a combined profile (straight/radius 3 mm/bevel 1.5°) and two (2) motors at 12,000 RPM. Flush trimmers with vertical copy roller discs Ø120 mm and front copying pads.

Buffing unit
Fitted with two (2) independent motors (0.13 kW at 1400 RPM) to guarantee a perfect finish of ABS and PVC edges.

Front extensible support
With small rollers for large panels.

Rear plexiglass closure to view inside the operating units, which can be opened.

** REQUEST A QUOTE **