E350PM-230 * Automatic edge bander with glue pot and chain feeding system

Professional finishing quality in only 2.44 meters in length

Logical operation controlled by PLC

Equipped with:

• Thermostatic glue control with automatic stand-by and temperature indicator.
• LED light-up buttons for selecting machine operating units.
• Complete automation control of various operating units via the encoder located on the transmission system for panel feeding.
• Diagnostics system with messages for machine use and maintenance.
• Statistical operating data: total hours of machine use, total and partial meters of edge used.
• Panel feeding system featuring a chain with rubber pads for maximum adherence to the panel, mounted on a strong steel chain with 5/8" links.

Two (2) numerically controlled steel guides on the machine frame ensure the rubber pads run in a straight line and provide maximum resistance to lateral pressure.

Top pressure bar

With a double row of rubber rollers mounted on bearings. The height of the pressure bar is adjustable via a handwheel, depending on the thickness of the panel being processed, and is equipped with a metric scale height indicator.

Pre-milling with diamond cutterblocks

Mills the side of the panel where the edge will be applied to ensure a perfectly straight glue line without imperfections. This unit includes a waste extraction system and a blower to clean the milled side of the panel before the gluing phase.

Edge feeding: synchrony between panel and edge

Ensures perfect gluing thanks to the synchronized edge feed roller system, which is directly driven by the panel.

Pneumatic shear for cutting edge coils up to 2 mm

Pneumatic shear with automatic front and rear cuts.

Glue pot

Equipped with six (6) electrical heating elements (four in the glue pot, one in the turret, and one inside the glue spreading roller) to guarantee a uniform temperature, eliminating the risk of overheating that could damage the glue and compromise the gluing process. The motorized glue spreading roller applies a uniform layer of glue, adjustable in thickness, to the side of the panel to be processed.

Two (2) pressure rollers:

• First floating roller Ø 80 mm.
• Second rubber pressure roller.

Automatic front/rear single-motor end trimming unit (straight cut) with copiers and a collector hood.

Flush trimmers

Equipped with Z4 Ø75 mm cutterblocks, featuring disposable knives with a combined profile of straight/radius 3 mm and bevel 1.5°. The flush trimmers have a vertical copy roller disc Ø120 mm and front copying pads.

Glue scraping unit

Recommended for removing any excess glue in the joint area between the panel and the edge.

Buffing unit

Fitted with two (2) independent motors (0.13 kW at 1400 RPM), it guarantees a perfect finish on ABS and PVC edges.

Front extensible support

With small rollers for large panels.

Rear plexiglass closure

Allows visibility of the internal operating units and can be opened for easy access.

** REQUEST A QUOTE **