- |
- Youtube
- |
- 1-888-311-8643
- |
- Contact US
- |
- Français
- |
- My Account
FJS-20AH-600 * Fully automatic finger joint system w / automatic transfert
Product Code: FJS-20AH-600
Complete line including the following items:
25MT1 / 25CT x 3 / 25LC / 25RC/ 25AF / 20PR / 20AH
| FJS-20AH-600 * Fully automatic finger joint system w/ automatic transfert | |
| 25LC,left jointing shaper | |
| Jointing shaper motor | 20HP/600V/60Hz/3Ph |
| Shaper spindle dimension | 50 mm (D) x 150 mm (L) |
| Jointing knives (10x) | 160mm(D) x 4 mm(T) x 50 mm(B) - 2 teeth |
| Saw blade motor and trimming knife | 7.5HP/600V/60Hz/3Ph |
| Cutting blade dimension | 255 mm(D) x 4 mm(T) x 50 mm(B) - 80 teeth |
| Trimming knife dimension | 250 mm(D) x 20 mm(T) x 25,4 mm(B) - 12 teeth |
| Scoring blade motor | 2HP/600V/60Hz/3Ph |
| Scoring blade dimension | 180 mm(D) x 3 mm(T) x 30 mm(B) - 40 teeth |
| Cutting blade dimension | 178 mm(D) x 12 mm(T) x 30 mm (B) - 10 teeth |
| Hydraulic pump motor for table movement | 5HP/600V/60Hz/3Ph |
| Table dimension with PVC belt | 1590 mm (L) x 630 mm (W) x 610 mm (P) |
| Minimum and maximum working length | 150 mm ~ 1600 mm |
| Minimum and maximum working thickness | 20 mm ~ 150 mm |
| 25RC, right jointing shaper with gluing unit | |
| Jointing shaper motor | 20HP/600V/60Hz/3Ph |
| Shaper spindle dimension | 50 mm (D) x 150 mm (L) |
| Jointing knives (10x) | 160mm(D) x 4 mm(T) x 50 mm(B) - 2 teeth |
| Saw blade motor and trimming knife | 7.5HP/600V/60Hz/3Ph |
| Cutting blade dimension | 255 mm(D) x 4 mm(T) x 50 mm(B) - 80 teeth |
| Trimming knife | 250 mm(D) x 20 mm(T) x 25,4 mm(B) - 12 teeth |
| Scoring blade motor | 2HP/600V/60Hz/3Ph |
| Scoring blade dimension | 180 mm(D) x 3 mm(T) x 30 mm(B) - 40 teeth |
| Trimming knife | 178 mm(D) x 12 mm(T) x 30 mm (B) - 10 teeth |
| Hydraulic pump motor for table movement | 5HP/600V/60Hz/3Ph |
| Table dimension with PVC belt | 1590 mm (L) x 630 mm (W) x 610 mm (P) |
| Minimum and maximum working length | 150 mm ~ 1600 mm |
| Minimum and maximum working thickness | 20 mm ~ 150 mm |
| 20PR, Double chain pre-assembly station | |
| Feeding motor(2x) | 2HP/600V/60Hz/3Ph |
| Holding motor (2x) | 2HP/600V/60Hz/3Ph |
| Feeding speed | 90 m/min |
| Total lenght | 6000 mm |
| 20AH, assembly press | |
| Cut-off saw unit | 5HP/600V/60Hz/3Ph |
| Feeding speed | 63.8 m/min |
| Charging cycle time | 3-4 seconds |
| Cut-off saw unit spindle diameter and rotation speed | 30 mm (D) and 3000 RPM |
| Cutt-off saw blade dimensions | 305 mm(D) x 3 mm(T) x 25,4 mm(B) - 100 teeth |
| Unit with hydraulic pump of the assembly press | 5HP/600V/60Hz/3Ph |
| Adjustable pressure applied by the press | Up to 140 kg/cm² |
| Work piece length capacity | 6.2 m |
| Width of work pieces | 30 ~ 150 mm |
| Thickness of work pieces | 20 ~ 75 mm |
| 25CT, conveyor | |
| Belt conveyor feed motor | 1HP/600V/60C/3Ph |
| Table dimension | 630mm x 1600mm |
| 25MT1, Multiple feeding table | |
| Variable speed feed table motor | 5HP/600V/60Hz/3Ph |
| Feeding table dimension | 3470mm x 2200 mm |
| Longitudinal conveyor motor (2x) | 0.5HP/600V/60Hz/3Ph |
| Electric rollers | 0.25HP/600V/6Hz/3Ph |
| 25AF, Automated flipping tation | |
| Long conveyor motor | 0.5HP/600V/60Hz/3Ph |
| Gear motorof the flipper | 100 W |
| Push rule motor | 400 W / servo motor |
| Conveyor speed | 90 m/min |
| Table widht | 650 mm |