- |
- Youtube
- |
- 1-888-311-8643
- |
- Contact US
- |
- Français
- |
- My Account
FJS-20AH2M-600 * Fully automatic finger joint system with 2 modes
Product Code: FJS-20AH2M-600
Complete line including the following ten (10) items:
25MT1 /25CT5 x 5/ 25LC / 25RC / 25AF /20PR /20AH
Automated two (2) mode joining line:
1) Standard mode with cut for continuous work
2) Sequential mode without length cutting and without jointing finger at each end. Including an automatic rear gauge positioning system (1500 mm to 6100 mm)
*** During each cycle, the operator must ensure that his group of parts does not exceed at any time 6100 mm in length and/or 1500 mm minimum ***
| FJS-20AH2M-600 * Fully automatic finger joint system with 2 modes | |
| 25MT1, multiple feeding table with four compartments | |
| Feed table dimension | 3870 x 2200 mm |
| Feeding motor (variable speed) | 3Hp/600V/60Hz/3Ph |
| Longitudinal conveyor motor | 1Hp/600V/60Hz/3Ph |
| Electric drive roller motor | 0.25Hp/600V/60Hz/3Ph |
| 25CT5, transport conveyor (5x) | |
| Feeding motor (2x) | 1Hp/600V/60Hz/3Ph |
| Conveyor dimension | 3150 mm x 630 mm |
| 25LC, left jointing shaper | |
| Jointing shaper motor | 25Hp/600V/60Hz/3Ph |
| Shaper spindle size and rotation speed | 50 mm (D) x 150 mm (L) and 6000 RPM |
| Jointing knives (10x) | 160mm(D) x 4 mm(T) x 50 mm(B) - 2 teeth |
| Saw blade motor and scoring blade | 7.5Hp/600V/60Hz/3Ph |
| Blade dimension | 255 mm(D) x 4 mm(T) x 50 mm(B) - 80 teeth |
| Cutting blade | 250 mm(D) x 20 mm(T) x 25,4 mm(B) - 12 teeth |
| Scoring blade motor | 2Hp/600V/60Hz/3Ph |
| Scoring blade dimension | 180 mm(D) x 3 mm(T) x 30 mm(B) - 40 teeth |
| Cutting blade dimension | 178 mm(D) x 12 mm(T) x 30 mm (B) - 10 teeth |
| Conveyer table motor | 0.5Hp/600V/60Hz/3Ph |
| Hydraulic pump motor for table movement | 3.75Hp/600V/60Hz/3Ph |
| Table widht | 630 mm |
| Minimum and maximum working length | 300 mm ~ 3100 mm |
| Minimum and maximum working thickness | 20 mm ~ 150 mm |
| 25RC, Right jointing shaper with gluing unit | |
| Jointing shaper motor | 25Hp/600V/60Hz/3Ph |
| Shaper spindle size and rotation speed | 50 mm (D) x 150 mm (L) et 6000 RPM |
| Jointing knives (10x) | 160mm(D) x 4 mm(T) x 50 mm(B) - 2 teeth |
| Saw blade motor and scoring blade | 7.5Hp/600V/60Hz/3Ph |
| Blade dimension | 255 mm(D) x 4 mm(T) x 50 mm(B) - 80 teeth |
| Cutting blade | 250 mm(D) x 20 mm(T) x 25,4 mm(B) - 12 teeth |
| Scoring blade motor (2x) | 2Hp/600V/60Hz/3Ph |
| Scoring blade dimension(x2) | 180 mm(D) x 3 mm(T) x 30 mm(B) - 40 dents |
| Cutting blade dimension (2x) | 178 mm(D) x 12 mm(T) x 30 mm (B) - 10 teeth |
| Table conveyor motor | 0.5Hp/600V/60Hz/3Ph |
| Hydraulic pump motor for table movement | 3.75Hp/600V/60Hz/3Ph |
| Table widht | 630 mm (W) |
| Minimum and maximum working length | 300 mm ~ 3100 mm |
| Minimum and maximum working thickness | 20 mm ~ 150 mm |
| 20PR, double chain pre-assembly station | |
| Feeding motor (2x) | 3Hp/600V/60Hz/3Ph |
| Total lenght | 6100 mm |
| 20AH, Assembly press | |
| Cut-off saw unit | 5Hp/600V/60Hz/3Ph |
| Feeding speed | 125 m/min |
| Trimming unit spindle diameter and rotation speed | 30 mm (D) et 3000 RPM |
| Cut-off saw unit blade dimension (2x) | 305 mm(D) x 3 mm(T) x 25,4 mm(B) - 100 teeth |
| Unit with hydraulic pump of the assembly press | 7.5Hp/600V/60Hz/3Ph |
| Adjustable pressure applied by the press | Up to 140 kg/cm² |
| Work piece length capacity | 6.2 m |
| Width of work pieces | 30 ~ 150 mm |
| Thickness of work pieces | 20 ~ 75 mm |