FJS-20ACH-600 * Automatic finger joint system w / manual transfert
Double-tap and hold to zoom.
Mouse over the image to zoom.
Click to Enlarge
HOLYTEK

FJS-20ACH-600 * Automatic finger joint system w / manual transfert

Product Code: FJS-20ACH-600

Complete line including the following items:

25CT1I-600 / 25LC-600 / 25RC-600 / 25RT2-600 /20ACH-600

 

** REQUEST A QUOTE **

Code
FJS-20ACH-600
FJS-20ACH-600 * Automatic finger joint system w/ manual transfert
20ACH, input belt feed conveyor
Feeding motor 0.5Hp/600V/60Hz/3Ph 
Conveyor dimension 800 mm (L)
Conveyor PVC belt dimension  1650 mm(L) x 610 mm(P)
25LC, left jointing shaper
Jointing shaper motor 20Hp/600V/60Hz/3Ph 
Shaper spindle dimension 50 mm (D) x 150 mm (L)
Jointing knives (10x) 160mm(D) x 4 mm(T) x 50 mm(B) - 2 teeth
Saw blade motor and trimming knife
 7.5Hp/600V/60Hz/3Ph 
Blade 255 mm(D) x 4 mm(T) x 50 mm(B) - 80 teeth
Cutting blade dimension 250 mm(D) x 20 mm(T) x 25,4 mm(B) - 12 theet
Scoring blade motor 1Hp/600V/60Hz/3Ph  
Scoring blade dimension 180 mm(D) x 3 mm(T) x 30 mm(B) - 40 teeth
Cutting blade dimension 178 mm(D) x 12 mm(T) x 30 mm (B) - 10 teeth
Hydraulic pump motor for table movement 2Hp/600V/60Hz/3Ph 
Table dimension with PVC belt 1600 mm (L) x 630 mm (W) x 610 mm (P)
Minimum and maximum working length 150 mm ~ 800 mm
Minimum and maximum working thickness 20 mm ~ 150 mm
25RC, right jointing shaper with gluing unit
Jointing shaper motor 20Hp/600V/60Hz/3Ph 
Shaper spindle dimension 50 mm (D) x 150 mm (L)
Jointing knives (10x) 160mm(D) x 4 mm(T) x 50 mm(B) - 2 teeth
Saw blade motor and trimming knife 7.5Hp/600V/60Hz/3Ph 
Blade 255 mm(D) x 4 mm(T) x 50 mm(B) - 80 teeth
Cutting blade 250 mm(D) x 20 mm(T) x 25,4 mm(B) - 12 teeth
Scoring blade motor (2x) 1Hp/600V/60Hz/3Ph 
Scoring blade (2x) 180 mm(D) x 3 mm(T) x 30 mm(B) - 40 teeth
Cutting blades (2x) 178 mm(D) x 12 mm(T) x 30 mm (B) - 10 teeth 
Hydraulic pump motor for table movement 2Hp/600V/60Hz/3Ph 
Table dimension with PVC belt 1600 mm (L) x 630 mm (W) x 610 mm (P)
Minimum and maximum working length 150 mm ~ 800 mm
Minimum and maximum working thickness 20 mm ~ 150 mm
25RT2, roller transfer conveyor
Feeding motor
 0.5Hp/600V/60Hz/3Ph 
Table lenght
 2290 mm

20ACH, assembly press with chain feed
PVC belt feed motor 1Hp/600V/60Hz/3Ph 
Brushing unit motor 4936 mm (L) x 160 mm (P)
Moteur de l'unité de brossage 0.5Hp/600V/60Hz/3Ph 
Feeding speed 63.8 m/min
Charging cycle time 3-4 seconds
Motorized chain system for rapid transfer to the assembly press 0.5Hp/600V/60Hz/3Ph 
Cut-off saw unit motor 5Hp/600V/60Hz/3Ph 
Cut-off saw unit spindle diameter and rotation speed 30 mm (D) and 3000 RPM
Cut-off saw unit blades 305 mm(D) x 3 mm(T) x 25,4 mm(B) - 100 teeth
Unit with hydraulic pump of the assembly press 5Hp/600V/60Hz/3Ph 
Adjustable pressure applied by the press Up to 140 kg/cm²
Work piece length capacity 6.2 m
Width of work pieces 30 ~ 150 mm
Thickness of work pieces 20 ~ 75 mm