BT3-24 * Return conveyor for edgebander
Double-tap and hold to zoom.
Mouse over the image to zoom.
Click to Enlarge
DOUCET

BT3-24 * Return conveyor for edgebander

Product Code: BT3-24

Adapted to HOLYTEK equipment for a rapid return on investment!

The BT3-24 return conveyor for edge banding machines returns the product to the operator.

Superior quality PVC rollers.

 Receiving conveyor of 24, 30, 36 or 48 and 60 inches wide depending on your needs.

Additional return conveyor length also available per linear foot if needed.

Transfer by belt and motorized reception rollers with pneumatic vertical movement. When the end of the panel is detected, the receiving conveyor rollers retract and the panel is moved to the return rollers by the transfer belt.

Fixed speed transfer belt of 180 feet per minute.

Reception and return roller conveyors with variable speed from 30 to 90 feet per minute.

Several models available and adapted according to your equipment (Ex.: return conveyors for edgers, sandblasters, etc.).

 

** REQUEST A QUOTE **

Code
BT3-24
Return conveyor - BT3-24
Reception convoyer dimension  24'' (W) x 5' (L)
Reception convoyer variable speed  30 ~ 90 feet/min
Return convoyer dimension 24'' (w) x 10' (L)
Return convoyer variable speed 60 ~ 180 feet/min
Panels minimum dimension 12'' x 12''
Long sides panels maximum dimension 36'' x 96''
(4) sides panels maximum dimension 36'' x 36'' 
Maximum panels weight capacity  80 lbs
Compressed air required
 10 CFM @ PSI

SOFT AIR TABLE
Designed to facilitate the handling of panels by lifting them on an air cushion, the air table is mainly used between a return conveyor and an edgebander.