S-600 / 6.0-1KW * Programmable automatic cut-off saw
Double-tap and hold to zoom.
Mouse over the image to zoom.
Click to Enlarge
HOLYTEK

S-600 / 6.0-1KW * Programmable automatic cut-off saw

Product Code: S-600/6.0-1KW

The kickoff of improved production 

The machine cuts at a fixed length for various cutting requirements.

Ideal for finger jointing (for defect) materials and mass material preparation.

Advanced servomotor system.

Fast processing speed.  High stability and cutting accuracy of ± 0,5 mm.

Minimum size of workpiece: 300(L) x 30(W) x 10(H) mm.

Automatic positioning system.  The fast moving pusher reaches a maximum speed of 100 m/min with perfect positioning.

Cutting modes

  • Constant initial length: Enter up to 12 lengths + number of times the command should be repeated.
  • Variable initial length: Enter up to 12 lengths + quantity required for each.

Automatic trimming of head piece (This function is not available in marking lines cutting mode).

Memory of 99 sets of 12 lengths.

Code
S-600/6.0-1KW
S-600/6.0-1KW * Programmable automatic cut-off saw
Main motor 15HP/600V/60Hz/3Ph
Feeding servomotor 1 kW
Spindle diameter 1"
Spindle speed 3600 RPM
Saw blade diameter 24"
Variable feeding speed 0 ~ 60 m/min
Minimum workpiece length 300 mm
Working thickness 10 ~ 190 mm
Minimum working width 80 mm
Cutting capacity See the cutting range diagram
Cutting accuracy ± 0,5 mm
Infeed table lengths available 3000 - 4000 - 5000 - 6000 or 7000 mm
Infeed table height 39'' ¾
Working air pressure 5 ~ 7 kg/cm²
Machine dimensions 321'' 7/16(L) x 53-1/4"(W) x 60-3/4"(H)

- The machine performs defective part cutting.
- Auto tracer system: a fluorescent pen is used to mark off defective parts of the material which is cut off with the aid of the sensor.
- Pusher for large pieces.
- Extra emergency stop button