Double-tap and hold to zoom.
Mouse over the image to zoom.

FJS-20AH2M-600 * Fully automatic finger joint system with 2 modes

Product Code: FJS-20AH2M-600

Complete line including the following ten (10) items:

25MT1 /25CT5 x 5/ 25LC / 25RC / 25AF /20PR /20AH

Automated two (2) mode joining line:

1) Standard mode with cut for continuous work

2) Sequential mode without length cutting and without jointing finger at each end. Including an automatic rear gauge positioning system (1500 mm to 6100 mm)

*** During each cycle, the operator must ensure that his group of parts does not exceed at any time 6100 mm in length and/or 1500 mm minimum ***

 

** REQUEST A QUOTE **

Code
FJS-20AH2M-600
FJS-20AH2M-600 * Fully automatic finger joint system with 2 modes
25MT1, multiple feeding table with four compartments
Feed table dimension 3870 x 2200 mm
Feeding motor (variable speed) 3Hp/600V/60Hz/3Ph  
Longitudinal conveyor motor 1Hp/600V/60Hz/3Ph  
Electric drive roller motor 0.25Hp/600V/60Hz/3Ph    
25CT5, transport conveyor (5x)
Feeding motor (2x) 1Hp/600V/60Hz/3Ph  
Conveyor dimension 3150 mm x 630 mm
25LC, left jointing shaper
Jointing shaper motor 25Hp/600V/60Hz/3Ph  
Shaper spindle size and rotation speed 50 mm (D) x 150 mm (L) and 6000 RPM
Jointing knives (10x) 160mm(D) x 4 mm(T) x 50 mm(B) - 2 teeth
Saw blade motor and scoring blade 7.5Hp/600V/60Hz/3Ph   
Blade dimension 255 mm(D) x 4 mm(T) x 50 mm(B) - 80 teeth
Cutting blade 250 mm(D) x 20 mm(T) x 25,4 mm(B) - 12 teeth
Scoring blade motor 2Hp/600V/60Hz/3Ph  
Scoring blade dimension
180 mm(D) x 3 mm(T) x 30 mm(B) - 40 teeth
Cutting blade dimension 178 mm(D) x 12 mm(T) x 30 mm (B) - 10 teeth
Conveyer table motor 0.5Hp/600V/60Hz/3Ph  
Hydraulic pump motor for table movement 3.75Hp/600V/60Hz/3Ph    
Table widht 630 mm
Minimum and maximum working length 300 mm ~ 3100 mm
Minimum and maximum working thickness 20 mm ~ 150 mm
 
25RC, Right jointing shaper with gluing unit
Jointing shaper motor
25Hp/600V/60Hz/3Ph  
Shaper spindle size and rotation speed 50 mm (D) x 150 mm (L) et 6000 RPM
Jointing knives (10x)
160mm(D) x 4 mm(T) x 50 mm(B) - 2 teeth
Saw blade motor and scoring blade
7.5Hp/600V/60Hz/3Ph     
Blade dimension 255 mm(D) x 4 mm(T) x 50 mm(B) - 80 teeth 
Cutting blade
250 mm(D) x 20 mm(T) x 25,4 mm(B) - 12 teeth
Scoring blade motor (2x) 2Hp/600V/60Hz/3Ph  
Scoring blade dimension(x2) 180 mm(D) x 3 mm(T) x 30 mm(B) - 40 dents 
Cutting blade dimension (2x) 178 mm(D) x 12 mm(T) x 30 mm (B) - 10 teeth 
Table conveyor motor 0.5Hp/600V/60Hz/3Ph   
Hydraulic pump motor for table movement
3.75Hp/600V/60Hz/3Ph  
Table widht
630 mm (W)
Minimum and maximum working length  300 mm ~ 3100 mm
Minimum and maximum working thickness  20 mm ~ 150 mm
 
20PR, double chain pre-assembly station
Feeding motor (2x)
3Hp/600V/60Hz/3Ph  
Total lenght
6100 mm 
 
20AH, Assembly press
Cut-off saw unit 5Hp/600V/60Hz/3Ph  
Feeding speed 125 m/min
Trimming unit spindle diameter and rotation speed 30 mm (D) et 3000 RPM
Cut-off saw unit blade dimension (2x) 305 mm(D) x 3 mm(T) x 25,4 mm(B) - 100 teeth
Unit with hydraulic pump of the assembly press 7.5Hp/600V/60Hz/3Ph  
Adjustable pressure applied by the press Up to 140 kg/cm²
Work piece length capacity 6.2 m
Width of work pieces 30 ~ 150 mm
Thickness of work pieces 20 ~ 75 mm