IN-VS-M2L - Longitudinal veneer splicer

The Taiwan built machine, INNOVATOR’s VeneerMate M2 ensures to accurately and firmly bond veneer edges with no visible joint line.

It’s particularly suitable for the furniture industry and high-end decorative plywood. After the well-cut veneer strips are aligned evenly by the synchronized infeed rollers, the veneers are directly transported to the heating section for glue curing.

Coupled withINNOVATOR’s Double Knife Veneer Guillotines (CutMate D series), a perfect veneer cutting and splicing work can be achieved.

Features:

• Complied with Canadian safety standards
• The bottom transporting chains guided by wear-resistant rails
• Special-designed pressurized and heating mechanical structures
• Pre-glued and dried veneers required prior to feeding into the machine for jointing
• The latest designed transporting chains of engineering plastics for reducing the heat on veneers
• Reflective photocell sensor in the infeed section to ensure a perfect alignment of the jointed veneers
• Splicing up to 5 mm of veneer thickness with production speed, temperature and other proper adjustments
• Ideal for processing high quality glue-spliced veneer faces (different from the traditional paper taping or zig-zag thread stitchers)
• The top and bottom transporting chains driven by one single motor for synchronization with one inverter controlling the running speed
• SSR (solid state relay) heating controller, different from the heater with traditional magnetic contactor, for more accurate temperature control and longer life without sparks of contacts
• Three heater bars suspended in the middle of the top pressure system between the top transporting chains and another three heater bars fitted between the bottom transporting chains
• Infeed stopper device available for smoother feeding of 1.5 ~ 5 mm thick veneers(VeneerMate M2L)