- |
- Youtube
- |
- 1-888-311-8643
- |
- Contact US
- |
- Français
- |
- My Account
S-600 / 5.0-1KW - Programmable automatic cut-off saw
Product Code: S-600/5.0-1KW
The kickoff of improved production
The machine cuts at a fixed length for various cutting requirements.
Ideal for finger jointing (for defect) materials and mass material preparation.
Advanced servomotor system.
Fast processing speed. High stability and cutting accuracy of ± 0,5 mm.
Minimum size of workpiece: 300(L) x 80(W) x 10(H) mm.
Automatic positioning system. The fast moving pusher reaches a maximum speed of 100 m/min with perfect positioning.
Cutting modes
- Constant initial length: Enter up to 12 lengths + number of times the command should be repeated.
- Variable initial length: Enter up to 12 lengths + quantity required for each.
Automatic trimming of head piece (This function is not available in marking lines cutting mode).
Memory of 99 sets of 12 lengths.
| Automatic programmable cut-off saw - S-600 | |
| Main motor | 15HP/600V/60Hz/3Ph |
| Feeding servomotor | 1 kW |
| Spindle diameter | 1" |
| Spindle speed | 3600 RPM |
| Saw blade diameter | 24" |
| Variable feeding speed | 0 ~ 100 m/min |
| Minimum workpiece length | 300 mm |
| Working thickness | 10 ~ 190 mm |
| Working width | 30 ~ 400 mm |
| Cutting capacity | See the cutting range diagram |
| Cutting accuracy | ± 0,5 mm |
| Infeed table lengths available | 3000 - 4000 - 5000 - 6000 or 7000 mm |
| Infeed table height | 34-3/4" |
| Working air pressure | 5 ~ 7 kg/cm² |
| Machine dimensions | Variable(L) x 53-1/4"(W) x 60-3/4"(H) |
- The machine performs defective part cutting.
- Auto tracer system: a fluorescent pen is used to mark off defective parts of the material which is cut off with the aid of the sensor.
- Pusher for large pieces.
- Extra emergency stop button
- Auto tracer system: a fluorescent pen is used to mark off defective parts of the material which is cut off with the aid of the sensor.
- Pusher for large pieces.
- Extra emergency stop button